SafetyBanners.Org - SafetyBanners.Org

OSHA Inspection Checklist

Compiled by SafetyBanners.Org and Safety Banners USA

A well-run quality safety program has nothing to fear from an OSHA inspection.

CLICK HERE for our NEW safety store, Safety Banners USA (safetybannersUSA.com)

CLICK HERE to Down load the OSHA Inspection Checklist

When an OSHA inspection happens at your facility, you won't get a warning. The best way to prepare for an OSHA inspection is to have an active health and safety program with a safety coordinator or safety manager in charge that regularly assess your OSHA inspection readiness.??The OSHA inspection preparation checklist below covers a wide range of safety topics that are frequently a part of typical OSHA inspection. This is not a complete list; however, this OSHA inspection preparation checklist will help you perform an OSHA pre-inspection assessment of your OSHA inspection readiness. If a topic doesn't apply to your facility, of course skip it, and move on to the next one. Once you are finished, you'll have good sense of where your OSHA Inspection reediness stands

Review Performed By ____________________________________ Date______________
print your name

COMPRESSED GAS CYLINDERS

__ All cylinders are legibly labeled to identify their contents.

COMPRESSORS/AIR RECEIVERS

__ Every receiver has a pressure gauge and at least one automatic safety valve.

__ There is a current operating permit.

CONFINED SPACES

__ Permit-required confined spaces are only entered with the proper permit and according to the procedures of the confined space program.

__ Regular tests of the confined space atmosphere are performed before and while people are ?? inside a confined space.
__ An attendant is posted outside confined spaces while work is performed in case of an emergency.
__ Respiratory protection is required if the atmosphere in the confined space is unsafe.

__ If an emergency occurs, responders only enter the confined space with respiratory protection and a lifeline.

EGRESS & EVACUATION
__ Exits are labeled with exit signs and illuminated so they're always visible.
__ Enough exits exist so people can leave quickly during an emergency.
__ All doors and routes that could be mistaken for exits are marked so people aren't confused about their purpose (such as "NOT AN EXIT" or 'TO STORAGE ROOM").
__ All exits are free from obstructions.

ELECTRICAL
__ Electrical equipment is installed appropriately and receives regular maintenance
__ Necessary labels of electrical hazards are posted on equipment.
__ Employees who will work on or near electrical equipment have received proper training.

__ Temporary wiring such as flexible cords does not cause a tripping hazard.

EMPLOYER POSTING
__ The mandatory OSHA Job Safety and Health Protection Poster is prominently displayed where employees can see it.

__ Emergency phone numbers are clearly posted.

ENVIRONMENTAL CONTROLS
__ All work areas have adequate lighting.
__ Work areas have appropriate ventilation systems.
__ Hazardous substances such as blood and infectious materials are identified.
__ Water for drinking, cooking, and washing is potable

FIRE PROTECTION
__ The fire alarm system is certified and tested annually.
__ All fire doors are clear from obstructions.
__ Fire extinguishers of the appropriate type are mounted in accessible locations.

__ Fire extinguishers are regularly recharged, and this is noted on the tag.

FIRST AID
__ Stocked first aid kits are available in all work areas. Someone is responsible for refilling these on a regular basis.
__ Eyewash stations, sinks, and/or showers are available for flushing the eyes or skin after exposure to harmful substances.
__ Employees have received appropriate first aid training and instructions about what to do in an emergency.

FLAMMABLE AND COMBUSTIBLE MATERIALS
__ Proper storage containers and methods are used to prevent spontaneous combustion of materials.

__ All combustible waste, debris, and scrap is stored in metal containers and removed from the worksite appropriately.

FORKLIFTS
__ Employees who operate forklifts have received proper training for the fork trucks they operate.
__ Untrained employees are not allowed to operate forklifts.
__ Forklifts are equipped with warning horns that can be heard above normal noise levels.

__ Brakes that can bring trucks to a complete stop especially when the truck is fully loaded.

GENERAL WORK ENVIRONMENT
__ The workplace is clean and sanitary.
__ The workplace is organized-tripping hazards and other problems associated with a messy workplace do not exist.

__ The minimum number of restrooms is provided for employees.

HAZARD COMMUNICATION
__ Employees are trained so they understand hazards and can read SDSs and labels, plus know how to safely handle chemicals such as acids, bases, caustics, etc.
__ Employees who handle hazardous chemicals must wear appropriate PPE.
__ There is a comprehensive list of hazardous substances used in the workplace and the corresponding SDS for each chemical.
__ Employees are trained so they understand hazards and can read SDSs and labels, plus know how to safely handle chemicals such as acids, bases, caustics, etc.

__ Employees are trained so they understand OSHA's blood borne pathogens standard.

HAND TOOLS & POWER TOOLS
__ All tools used in the workplace are in good condition.
__ Moving parts are guarded to prevent injury.

__ Tools are stored in a secure, dry location.

LADDERS
__ All ladders are in good condition and receive maintenance when needed.

__ All employees have received training about how to safely use a ladder.

LOCKOUT/TAGOUT
__ Procedures require that all equipment is de-energized or disengaged and locked out during maintenance or cleaning

MACHINE GUARDING
__ All machinery and equipment are regularly inspected and serviced as needed.
__ Power shut offs are within reach of operators.
__ Emergency stop buttons are red.

NOISE
__ Noise levels in the workplace do not exceed 85 decibels.

__ In locations where loud noises occur, employees always wear hearing protection.

__ Appropriate PPE such as face, head, eye, hand, and foot protection are available for employees who need to wear it to safely perform their jobs.

__ Procedures exist for testing, storing, and cleaning of PPE.

PIPE IDENTIFICATION
__ Outlets and taps attached to pipes with non-portable water are marked as unsafe for drinking, washing, etc.
__ Where colored painted bands or tapes are used on pipelines, they are spaced at appropriate intervals and at outlets, valves, and connection points.
__ A color code is posted for pipes so employees can see what hazards pipes present.

__ Names and name abbreviations are easily visible on pipe labels.

RECORD KEEPING
__ All injuries and illnesses, other than those only requiring first aid, are recorded in the OSHA 300 log.

__ Employee training records are available for review.

SAFETY AND HEALTH PROGRAM
__ An active safety program exists for maintaining employee safety and health, and it's clear who oversees this program.

TRANSPORTING EMPLOYEES
__ Vehicles that transport employees have brakes, lamps, mirrors, horns, windshields, and turn signals and are in good working condition.

__ Vehicles have handrails, steps, and other devices to help employees mount or dismount.

WALKWAYS
__ All aisles are appropriately marked and unobstructed.
__ Holes in the walking surface are covered or repaired so people can walk safely.
__ Non-slip materials are used on wet surfaces to improve traction.
__ Walkways that pass by moving equipment or other hazards are positioned so people won't be exposed to hazards.

WELDING & CUTTING
__ Compressed air gas cylinders are examined on a regular basis for leaks, rust, or defects.
__ Signs clearly stating smoking, matches, and other ignition sources are not allowed are posted.

__ PPE including eye protection, helmets, goggles, and hand shields meet standards.

WRITTEN PROGRAMS
__ Documented Hazard Communication System exists, and all Safety Data Sheets are available to all employees.
__ The lockout/tagout program is clearly written so employees know how to de-energize equipment.
__ A written respiratory protection program that lays out the rules of selecting, testing, wearing, storing, and cleaning all personal protective equipment (PPE).

A well-run quality safety program has nothing to fear from an OSHA inspection.

Compiled by SafetyBanners.Org
Memphis Tennessee, since 1995